| MiSUMI Inclined Transfer Conveyor Belt Ribbed 25mm x 4100mm 2 qty Loop LHBLT | Fillet Radius/Chamfer:7.5 mm; Bore Type:Cylindrical Bore; Da (max):1114 mm; Groove Width A:45 mm; Axial Load Factor Y1:3.20; da (min):836 mm; Axial Load Factor Y2:4.77; Nr. of Holes:8; Weight:910.000 kg; Configuration:Double Row; Retainer Material:Machined Brass; ra (max):6 mm; Static Load Rating:20,900,000 N; Enclosure:Open; Roller Profile:Symmetric; Limiting Speed - Grease:310 rpm; Constant e:0.21; |
| Flat Top Perforated Modular Conveyor Belt 24"x6' Ribbed/Flights | Static Load Rating:890,000 N; Limiting Speed - Oil:3,400 rpm; Constant e:0.30; Nr. of Holes:6; Axial Load Factor Y0:2.21; Da (max):236 mm; Dynamic Load Rating:945,000 N; Limiting Speed - Grease:2,700 rpm; D:250 mm; Retainer Material:Machined Brass; ra (max):2.5 mm; Enclosure:Open; Radial Clearance:0.095 to 0.145 mm; da (min):154 mm; Bore Type:Cylindrical Bore; Groove Width A:12 mm; d:140 mm; Axial Load Factor Y1:2.26; |
| Perforated Flat Top Modular Conveyor Belt 24"x11'-3" Length Ribbed/Flights | r1,2 min.:2.1 mm; Limiting value e:0.2; B:35 mm; db min.:100 mm; Mass bearing:3.27 kg; F:89 mm; d:70 mm; Reference speed:4800 r/min; D1 ≈:126.35 mm; Axial load factor Y:0.6; Basic static load rating C0:228 kN; r3,4 min.:2.1 mm; Fatigue load limit Pu:29 kN; d1 ≈:97.3 mm; D:150 mm; Basic dynamic load rating C:236 kN; Da max.:137.5 mm; da min.:82 mm; Calculation factor kr:0.23; Limiting speed:8500 r/min; |
| Conveyor Belt, Ribbed, Plastic,12" x 22' 9", 1" Pitch | d:30 mm; Basic dynamic load rating C:83 kN; da max.:39 mm; Reference speed:11000 r/min; ra max.:1 mm; Axial load factor Y:0.4; Limiting value e:0.3; D:72 mm; Da max.:65.1 mm; Calculation factor kr:0.38; Fatigue load limit Pu:9.65 kN; D1 ≈:58.85 mm; r3,4 min.:1.1 mm; db min.:47 mm; Basic static load rating C0:75 kN; F:40.5 mm; da min.:37 mm; d1 ≈:45 mm; Limiting speed:19000 r/min; B:27 mm; |
| 2-Ply Longitudinal Ribbed Grooved Top Black Rubber Conveyor Belt 26"x84" (7') | Cap bolt recommended tightening torque:298.3 N·m; h:39.688 mm; P90°:55.6 kN; P60°:92.5 kN; L:330.2 mm; J min.:250.825 mm; da:70 mm; Cap bolt:2 x 5/8-11 UNC; H1:95.25 mm; dc:66.675 mm; Labyrinth ring (dc shaft position):LOR 43; P120°:34.7 kN; Ca:60.808 mm; PosiTrac Plus contact element (db shaft position):B10724-64; H:187.325 mm; P180°:37.8 kN; RG:3/8 NPT; H2:33.337 mm; End plug (suffix Y):EPR 8; |
| 26" PVC Woven Back 0.095"T 2 Ply Longitudinal Ribbed Conveyor Belt 22'-5" | Cap bolt, SAE grade:8; P90°:47.2 kN; Cap bolt recommended tightening torque:298.3 N·m; Mass pillow block:23.6 kg; dc:80.963 mm; P180°:32 kN; Cap bolt:2 x 5/8-11 UNC; P150°:26.7 kN; Da:150 mm; ba:35.719 mm; PosiTrac Plus contact element (dc shaft position):B10724-64; Stabilizing ring:SR-17-14; S:4.763 mm; Housing:SAFS 217; L:330.2 mm; Labyrinth ring (db shaft position):LOR 89; A2:127 mm; |
| Beltech USO-00025077 32" Woven Back Longitudinal Ribbed Top Conveyor Belt 23'-4" | Limiting speed:1200 r/min; Da min.:402 mm; Calculation factor Y0:1.6; Da max.:424 mm; T:152 mm; Calculation factor e:0.43; Calculation factor Y2:2.3; Ca min.:9 mm; K:15 mm; da max.:343 mm; D:440 mm; Reference speed:750 r/min; Basic static load rating C0:4650 kN; b:17 mm; d:320 mm; ra max.:1 mm; rc max.:1 mm; 2B:152 mm; Basic dynamic load rating C:1982 kN; r3,4 min.:3 mm; |
| 32" 2 Ply PVC Woven Back Longitudinal Ribbed Conveyor Belt 12'6" | d2 ≈:55.2 mm; Calculation factor Y2:0.87; Da max.:91 mm; D1 ≈:79.54 mm; r3,4 min.:1 mm; d:45 mm; Calculation factor X:0.41; Basic dynamic load rating C:68 kN; Calculation factor A:0.0109; Basic static load rating C0:45.5 kN; da min.:54 mm; Fatigue load limit Pu:1.93 kN; Calculation factor e:0.68; Limiting speed:13000 r/min; Calculation factor Y0:0.76; Calculation factor Y1:0.92; rb max.:1 mm; |
| Habasit TT140/U RIB.08 Conveyor Belt 36.426m 493mm | d:30 mm; Weight:0.290 kg; a (max):3.3 mm; da:36 mm; Dynamic Load Rating:30,500 N; Dx:68.5 mm; B:23.8 mm; D:62 mm; Configuration:Double Row; Da:56 mm; Limiting Speed - Grease:8,000 rpm; Static Load Rating:21,700 N; Enclosure:Open; Radial Clearance:0.013 to 0.028 mm; Limiting Speed - Oil:11,000 rpm; ra:1 mm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1 mm; Groove Width:1.9 mm; Groove Diameter:59.6 mm; |
| 26" Woven Back Longitudinal Ribbed Top Conveyor Belt 14'-5" | d:130 mm; Static Load Rating:1,220,000 N; Enclosure:Open; Retainer Material:Machined Brass; Configuration:Double Row; Axial Load Factor Y2:2.64; Weight:27.300 kg; Constant e:0.38; Limiting Speed - Oil:3,300 rpm; Axial Load Factor Y1:1.77; Center Guidance:Fixed Inner Ring Rib; Dynamic Load Rating:1,370,000 N; B:93 mm; Hole Diameter (do):8 mm; Nr. of Holes:6; ra (max):3 mm; da (min):148 mm; Limiting Speed - Grease:2,500 rpm; |
| qty 50 feet MIDWEST RUBBER Conveyor Belt V-Guide Orange Volta embossed rib top | Cb min.:9 mm; db min.:88 mm; Ca min.:9 mm; Db min.:139 mm; Basic static load rating C0:450 kN; d1 ≈:111 mm; T:51 mm; Reference speed:3600 r/min; Basic dynamic load rating C:380 kN; rb max.:2.5 mm; Mass bearing:3.9 kg; r3,4 min.:2.5 mm; a:35.728 mm; Calculation factor Y0:0.9; Calculation factor Y:1.6; r1,2 min.:3 mm; ra max.:3 mm; da max.:89 mm; d:75 mm; Fatigue load limit Pu:51 kN; |
| Sparks 21-1/2" PVC Back 2 Ply Longitudinal Ribbed Conveyor Belt 95' | Radial Clearance:0.030 to 0.060 mm; Inside Ring Outside Diameter:60.4 mm; dd (min):67 mm; Bore Type:Cylindrical Bore; r1:1.1 mm; dc (min):62 mm; B:23 mm; db (max):58 mm; D:90 mm; Da (max):83 mm; Enclosure:Open; Limiting Speed - Oil:8,000 rpm; Dynamic Load Rating:64,000 N; ra (max):1 mm; ra1 (max):1 mm; Static Load Rating:73,500 N; d:50 mm; Fillet Radius/Chamfer:1.1 mm; Configuration:Single Row; db (min):57 mm; |
| No. | Brand | U | A | G | K | F | a | H | L |
| 3 | - | - | - | - | - | - | - | - | 419.1 mm |
| 227696 | - | - | - | - | - | - | - | - | - |
| 24"x11'-3" | - | - | - | - | - | 89 mm | - | - | - |
| 26" | INA | - | - | - | - | - | - | - | - |
| 26" | INA | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | 35.728 mm | - | - |
| 26" | INA | - | - | - | - | - | - | - | - |
| 19-1/4" | INA | - | - | - | 12 mm | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
| 36in | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 26" | INA | - | - | - | - | - | - | 192.484 mm | 349.25 mm |
| 8635166215 | - | - | 8 mm | Tr 600x6 | - | - | - | - | - |
| USO-00025077 | INA | - | - | - | 15 mm | - | - | - | - |
| 2-Ply | INA | - | - | M 45x1.5 | - | - | - | - | - |
| 900 | - | - | - | - | - | - | - | - | - |
| TT140/U | - | - | - | - | - | - | - | - | - |
| 21-1/2" | INA | - | - | - | - | - | - | - | - |
| 26" | INA | - | - | - | - | - | - | 187.325 mm | 330.2 mm |
| 32" | INA | - | - | - | - | - | - | - | - |
| 24" | INA | - | - | - | - | - | - | - | - |
| 10/2 | INA | - | - | - | - | - | 12.2 mm | - | - |
| 1 | - | - | - | M 64x4 | - | - | - | - | - |
| 26" | INA | - | - | - | - | - | - | - | - |
| 1 | INA | - | 54 mm | - | - | - | - | 114 mm | 203 mm |
| 2-Ply | INA | - | - | - | - | - | - | 187.325 mm | 330.2 mm |
| 208" | - | - | - | - | - | 85 mm | - | - | - |
Shop on eBay Video
Ribbed belts - elastic - Optibelt
Elastic ribbed belts of the optibelt CONVEYOR POWER RB series are used in all fields of the transport and logistics industry.
ConveyXonic Poly-V Conveyor Belts - Dura-Belt
Ribbed roller endcaps (also called hubs) made from steel take the place of sprockets. In many applications poly-v belts work better, as they usually last ...
Textured Surface Incline Belts - Stiles Enterprises Inc.
Longitudinal groove / Ribbed Surface Conveyor Belting, Longitudinal groove Surface Belting. Acceleration belt; Decline belt; Gapping belt; Incline belt; ...
Longitudinal Rib Standard Multi-Ply Conveyor Belts - Grainger
Standard multi-ply conveyor belting is used to replace a worn or damaged belt on a conveyor to prevent belt malfunction and conveyor downtime.
2 Ply Black PVC Ribbed Conveyor Belt
Our black 2 ply PVC ribbed conveyor belt is an excellent choice for incline and decline conveyors. The longitudinal groove structure can move boxes or packages ...
6" Tall Heavy 2 Ply Rubber S Ribbed Corrugated ... - eBay
Sponsored items from this seller · 24" Woven Back 2 Ply Longitudinal Ribbed Conveyor Belt 0.103"T 2 Pcs. · Uni Chains LF 879 3-1/4" Side Flexing Radius Flat Table ...
#62: 3-Ply Black Ribflex Conveyor Belt - Great Lakes Belting
Ideal for the steepest of inclines, the top surface of this conveyor belt features soft ribs, which enhance grip.
ZipLink Natural Rubber Ribbed Belt
Big River Rubber & Gasket stocks conveyor belts suitable for many industrial, agricultural, packaging, and warehouse applications.
Raised-rib conveyor belt - All industrial manufacturers
The PVC / PU Conveyor Belt, developed by Tempo International, is a device for light weight conveying. Its maximum width is 3000 mm.