| 26" 2 Ply Woven Back Longitudinal Ribbed Conveyor Belt 20'8" | ra (max):2 mm; Configuration:Single Row; Limiting Speed - Grease:2,800 rpm; Fillet Radius/Chamfer:2.1 mm; Weight:3.590 kg; Dynamic Load Rating:123,000 N; d:80 mm; Bore Type:Cylindrical Bore; Radial Clearance:0.025 to 0.051 mm; Static Load Rating:86,500 N; Enclosure:Double Seal; D:170 mm; B:39 mm; da (min):92 mm; Da (max):158 mm; Factor fo:13.2; |
| 19-1/4" W PVC Back Longitudinal Ribbed Conveyor Belt 12'3" | Basic static load rating C0:12500 kN; D1 ≈:676 mm; Calculation factor Y1:1.9; Mass bearing + sleeve:670 kg; B2:70 mm; Calculation factor Y2:2.9; b:22.3 mm; B1:361 mm; db min.:469 mm; Calculation factor Y0:1.8; da max.:549 mm; Calculation factor e:0.35; Basic dynamic load rating C:8150 kN; Da max.:758 mm; r1,2 min.:7.5 mm; d2 ≈:549 mm; B5:90 mm; K:12 mm; Reference speed:430 r/min; d3:560 mm; |
| MiSUMI Inclined Transfer Conveyor Belt Ribbed 25mm x 4100mm 2 qty Loop LHBLT | Fillet Radius/Chamfer:7.5 mm; Bore Type:Cylindrical Bore; Da (max):1114 mm; Groove Width A:45 mm; Axial Load Factor Y1:3.20; da (min):836 mm; Axial Load Factor Y2:4.77; Nr. of Holes:8; Weight:910.000 kg; Configuration:Double Row; Retainer Material:Machined Brass; ra (max):6 mm; Static Load Rating:20,900,000 N; Enclosure:Open; Roller Profile:Symmetric; Limiting Speed - Grease:310 rpm; Constant e:0.21; |
| Beltech Flexam EX 10/2 0+A32 20" Longitudinal Ribbed Conveyor Belt 15'4" | r3,4 min.:0.6 mm; Mass bearing:0.11 kg; d2:36.4 mm; Calculation factor f1:1; Calculation factor f2C:1.05; Static axial stiffness, preload class B:44 N/µm; Attainable speed for oil-air lubrication:60000 r/min; da min.:34.6 mm; Attainable speed for grease lubrication:39000 r/min; Reference grease quantity Gref:1.7 cm³; rb max.:0.6 mm; d:30 mm; a:12.2 mm; d1:38.2 mm; Calculation factor f2B:1.03; |
| 26" Woven Back Longitudinal Ribbed Top Conveyor Belt 14'-5" | d:130 mm; Static Load Rating:1,220,000 N; Enclosure:Open; Retainer Material:Machined Brass; Configuration:Double Row; Axial Load Factor Y2:2.64; Weight:27.300 kg; Constant e:0.38; Limiting Speed - Oil:3,300 rpm; Axial Load Factor Y1:1.77; Center Guidance:Fixed Inner Ring Rib; Dynamic Load Rating:1,370,000 N; B:93 mm; Hole Diameter (do):8 mm; Nr. of Holes:6; ra (max):3 mm; da (min):148 mm; Limiting Speed - Grease:2,500 rpm; |
| Conveyor Belting HD 36in Ribbed - Approximately 125 Ft. | Dynamic Load Rating:1,440,000 N; dc (min):298 mm; db (max):293 mm; Weight:83.500 kg; Fillet Radius/Chamfer:4 mm; B:120 mm; Enclosure:Open; Static Load Rating:2,320,000 N; db (min):258 mm; Da (max):422 mm; Bore Type:Cylindrical Bore; d:240 mm; r1:4 mm; ra (max):3 mm; Limiting Speed - Grease:1,300 rpm; dd (min):316 mm; Radial Clearance:0.110 to 0.175 mm; D:440 mm; Configuration:Single Row; Limiting Speed - Oil:1,600 rpm; |
| 2-Ply Longitudinal Ribbed Grooved Top Black Rubber Conveyor Belt 32"x9' Long | Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1.1 mm; Configuration:Single Row; Radial Clearance:0.023 to 0.043 mm; Weight:0.384 kg; Dynamic Load Rating:28,300 N; Limiting Speed - Grease:4,500 rpm; ra (max):1 mm; B:18 mm; da (min):61 mm; D:90 mm; Static Load Rating:21,300 N; d:55 mm; Factor fo:15.4; Enclosure:Double Seal; Da (max):84 mm; |
| 1 ply black longitudinal grooved ribbed conveyor belt 8'x30"x0.128" | J6:187 mm; Hexagonal key size for grub screw N:3 mm; J7:19 mm; s1:27.5 mm; A:54 mm; A5:29.5 mm; Basic dynamic load rating C:35.1 kN; Housing:SY 510 M/VZ033; Recommended diameter for attachment bolts, mm G:16 mm; H2:22 mm; N:26 mm; L:203 mm; N4:4 mm; J min.:149 mm; Housing material:Cast iron; Mass bearing unit:2.65 kg; H:114 mm; N1:18 mm; Basic static load rating C0:23.2 kN; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Habasit TT140/U RIB.08 Conveyor Belt 36.426m 493mm | d:30 mm; Weight:0.290 kg; a (max):3.3 mm; da:36 mm; Dynamic Load Rating:30,500 N; Dx:68.5 mm; B:23.8 mm; D:62 mm; Configuration:Double Row; Da:56 mm; Limiting Speed - Grease:8,000 rpm; Static Load Rating:21,700 N; Enclosure:Open; Radial Clearance:0.013 to 0.028 mm; Limiting Speed - Oil:11,000 rpm; ra:1 mm; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1 mm; Groove Width:1.9 mm; Groove Diameter:59.6 mm; |
| 2-Ply Black Rubber Longitudinal Ribbed Conveyor Belt 26" Wide 11' Long | Da min.:167 mm; Basic static load rating C0:280 kN; ra max.:2.5 mm; Fatigue load limit Pu:33.5 kN; D:184.15 mm; rb max.:2.5 mm; d:101.6 mm; B:31.75 mm; da max.:162 mm; r3,4 min.:3.2 mm; Axial load factor Y:0.6; d1 ≈:130 mm; Mass bearing:3.7 kg; Basic dynamic load rating C:233 kN; Reference speed:3600 r/min; Da max.:169.5 mm; Limiting value e:0.2; E:165 mm; r1,2 min.:3.2 mm; Limiting speed:4300 r/min; |
| 2-Ply Longitudinal Ribbed Grooved Top Black Rubber Conveyor Belt 26"x84" (7') | Cap bolt recommended tightening torque:298.3 N·m; h:39.688 mm; P90°:55.6 kN; P60°:92.5 kN; L:330.2 mm; J min.:250.825 mm; da:70 mm; Cap bolt:2 x 5/8-11 UNC; H1:95.25 mm; dc:66.675 mm; Labyrinth ring (dc shaft position):LOR 43; P120°:34.7 kN; Ca:60.808 mm; PosiTrac Plus contact element (db shaft position):B10724-64; H:187.325 mm; P180°:37.8 kN; RG:3/8 NPT; H2:33.337 mm; End plug (suffix Y):EPR 8; |
| 26" PVC Woven Back 0.095"T 2 Ply Longitudinal Ribbed Conveyor Belt 22'-5" | Cap bolt, SAE grade:8; P90°:47.2 kN; Cap bolt recommended tightening torque:298.3 N·m; Mass pillow block:23.6 kg; dc:80.963 mm; P180°:32 kN; Cap bolt:2 x 5/8-11 UNC; P150°:26.7 kN; Da:150 mm; ba:35.719 mm; PosiTrac Plus contact element (dc shaft position):B10724-64; Stabilizing ring:SR-17-14; S:4.763 mm; Housing:SAFS 217; L:330.2 mm; Labyrinth ring (db shaft position):LOR 89; A2:127 mm; |
| No. | Brand | U | A | G | K | F | a | H | L |
| 3 | - | - | - | - | - | - | - | - | - |
| 21-1/2" | INA | - | - | - | - | - | - | - | - |
| 24" | INA | - | 8 mm | Tr 750x7 | - | - | - | - | - |
| 26" | INA | - | - | - | - | - | - | - | - |
| 10/2 | - | - | - | - | - | - | - | - | - |
| USO-00025077 | INA | - | - | - | 15 mm | - | - | - | - |
| 1 | INA | - | 54 mm | - | - | - | - | 114 mm | 203 mm |
| 25mm | - | - | - | - | - | - | - | - | - |
| 227696 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | 20.621 mm | - | - |
| 32" | INA | - | - | - | - | - | - | - | - |
| Plastic,12" | - | - | - | - | - | 40.5 mm | - | - | - |
| 3 | - | 35 mm | - | - | - | - | - | - | - |
| TT140/U | - | - | - | - | - | - | - | - | - |
| 2-Ply | INA | - | - | M 45x1.5 | - | - | - | - | - |
| 22-101284/08V | - | - | - | - | - | - | - | - | - |
| 2-Ply | INA | - | - | - | - | - | - | - | - |
| 26" | INA | - | - | - | - | - | - | 187.325 mm | 330.2 mm |
| E8/20/V15S/LG | INA | - | - | - | - | - | 5 mm | - | - |
| 208" | - | - | - | - | - | 85 mm | - | - | - |
| 8635166215 | - | - | 8 mm | Tr 600x6 | - | - | - | - | - |
| 10/2 | INA | - | - | - | - | - | 12.2 mm | - | - |
| 24"x6' | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | 419.1 mm |
qty 50 feet MIDWEST RUBBER Conveyor Belt V-Guide Orange Volta embossed rib top Video
Longitudinal Rib Standard Multi-Ply Conveyor Belts - Grainger
Standard multi-ply conveyor belting is used to replace a worn or damaged belt on a conveyor to prevent belt malfunction and conveyor downtime.
#62: 3-Ply Black Ribflex Conveyor Belt - Great Lakes Belting
Ideal for the steepest of inclines, the top surface of this conveyor belt features soft ribs, which enhance grip.
ZipLink Natural Rubber Ribbed Belt
Big River Rubber & Gasket stocks conveyor belts suitable for many industrial, agricultural, packaging, and warehouse applications.
6" Tall Heavy 2 Ply Rubber S Ribbed Corrugated ... - eBay
Sponsored items from this seller · 24" Woven Back 2 Ply Longitudinal Ribbed Conveyor Belt 0.103"T 2 Pcs. · Uni Chains LF 879 3-1/4" Side Flexing Radius Flat Table ...
ConveyXonic Poly-V Conveyor Belts - Dura-Belt
Ribbed roller endcaps (also called hubs) made from steel take the place of sprockets. In many applications poly-v belts work better, as they usually last ...
Textured Surface Incline Belts - Stiles Enterprises Inc.
Longitudinal groove / Ribbed Surface Conveyor Belting, Longitudinal groove Surface Belting. Acceleration belt; Decline belt; Gapping belt; Incline belt; ...
2 Ply Black PVC Ribbed Conveyor Belt
Our black 2 ply PVC ribbed conveyor belt is an excellent choice for incline and decline conveyors. The longitudinal groove structure can move boxes or packages ...
Ribbed belts - elastic - Optibelt
Elastic ribbed belts of the optibelt CONVEYOR POWER RB series are used in all fields of the transport and logistics industry.
Raised-rib conveyor belt - All industrial manufacturers
The PVC / PU Conveyor Belt, developed by Tempo International, is a device for light weight conveying. Its maximum width is 3000 mm.