| 26" Nylon Woven Back Longitudinal Ribbed Top Conveyor Belt 0.079"T x 18'6" | ra (max):5 mm; Axial Load Factor Y0:1.69; Roller Profile:Symmetric; Da (max):692 mm; Limiting Speed - Oil:640 rpm; Hole Diameter (do):20 mm; Axial Load Factor Y1:1.73; Groove Width A:45 mm; Limiting Speed - Grease:510 rpm; B:280 mm; Axial Load Factor Y2:2.58; Static Load Rating:12,700,000 N; Constant e:0.39; Fillet Radius/Chamfer:6 mm; Center Guidance:Fixed Inner Ring Rib; Enclosure:Open; da (min):468 mm; |
| 227696 New-No Box, MFG- 150 White Rib Cleated Conveyor Belt 8-1/4"W, 100'Ft | db (min):83.5 mm; ra1 (max):1.5 mm; Da (max):121.5 mm; Limiting Speed - Oil:6,000 rpm; Fillet Radius/Chamfer:1.5 mm; dc (min):90 mm; dd (min):96 mm; db (max):87 mm; D:130 mm; Enclosure:Open; Static Load Rating:111,000 N; d:75 mm; Limiting Speed - Grease:4,800 rpm; r1:1.5 mm; Configuration:Single Row; ra (max):1.5 mm; B:25 mm; Radial Clearance:0.065 to 0.100 mm; Dynamic Load Rating:96,500 N; Bore Type:Cylindrical Bore; |
| MiSUMI Inclined Transfer Conveyor Belt Ribbed 25mm x 4100mm 2 qty Loop LHBLT | Fillet Radius/Chamfer:7.5 mm; Bore Type:Cylindrical Bore; Da (max):1114 mm; Groove Width A:45 mm; Axial Load Factor Y1:3.20; da (min):836 mm; Axial Load Factor Y2:4.77; Nr. of Holes:8; Weight:910.000 kg; Configuration:Double Row; Retainer Material:Machined Brass; ra (max):6 mm; Static Load Rating:20,900,000 N; Enclosure:Open; Roller Profile:Symmetric; Limiting Speed - Grease:310 rpm; Constant e:0.21; |
| 1 ply black longitudinal grooved ribbed conveyor belt 8'x30"x0.128" | J6:187 mm; Hexagonal key size for grub screw N:3 mm; J7:19 mm; s1:27.5 mm; A:54 mm; A5:29.5 mm; Basic dynamic load rating C:35.1 kN; Housing:SY 510 M/VZ033; Recommended diameter for attachment bolts, mm G:16 mm; H2:22 mm; N:26 mm; L:203 mm; N4:4 mm; J min.:149 mm; Housing material:Cast iron; Mass bearing unit:2.65 kg; H:114 mm; N1:18 mm; Basic static load rating C0:23.2 kN; Recommended diameter for attachment bolts, inch G:0.625 in; |
| 3 Ply White Rubber Horizontal V Ribbed Conveyor Belt 12Ft X 10-1/4" 0.155" Thick | C:17.5 mm; r3,4 min.:1.5 mm; Cb min.:5.5 mm; Dimension series:4CC; Limiting speed:6700 r/min; Calculation factor Y0:0.8; Basic dynamic load rating C:101 kN; d1 ≈:77.8 mm; B:23 mm; Da min.:85 mm; Basic static load rating C0:122 kN; r1,2 min.:1.5 mm; a:20.621 mm; db min.:69 mm; T:23 mm; Reference speed:5300 r/min; Fatigue load limit Pu:13.4 kN; rb max.:1.5 mm; Da max.:87 mm; Calculation factor Y:1.4; |
| 2-Ply Longitudinal Ribbed Grooved Top Black Rubber Conveyor Belt 32"x9' Long | Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1.1 mm; Configuration:Single Row; Radial Clearance:0.023 to 0.043 mm; Weight:0.384 kg; Dynamic Load Rating:28,300 N; Limiting Speed - Grease:4,500 rpm; ra (max):1 mm; B:18 mm; da (min):61 mm; D:90 mm; Static Load Rating:21,300 N; d:55 mm; Factor fo:15.4; Enclosure:Double Seal; Da (max):84 mm; |
| 26" Woven Back 2 Ply Longitudinal Ribbed Conveyor Belt 0.103"T 2 Pcs. 40" 95" | Enclosure:Open; Axial Load Factor Y0:2.01; Axial Load Factor Y2:3.06; d:360 mm; Nr. of Holes:8; Dynamic Load Rating:4,250,000 N; D:540 mm; da (min):382 mm; Roller Profile:Symmetric; Retainer Material:Machined Brass; Radial Clearance:0.300 to 0.400 mm; Hole Diameter (do):15 mm; Static Load Rating:6,350,000 N; Center Guidance:Fixed Inner Ring Rib; Constant e:0.33; Limiting Speed - Grease:670 rpm; Bore Type:Tapered Bore; |
| qty 50 feet MIDWEST RUBBER Conveyor Belt V-Guide Orange Volta embossed rib top | Cb min.:9 mm; db min.:88 mm; Ca min.:9 mm; Db min.:139 mm; Basic static load rating C0:450 kN; d1 ≈:111 mm; T:51 mm; Reference speed:3600 r/min; Basic dynamic load rating C:380 kN; rb max.:2.5 mm; Mass bearing:3.9 kg; r3,4 min.:2.5 mm; a:35.728 mm; Calculation factor Y0:0.9; Calculation factor Y:1.6; r1,2 min.:3 mm; ra max.:3 mm; da max.:89 mm; d:75 mm; Fatigue load limit Pu:51 kN; |
| 26" 2 Ply Woven Back Longitudinal Ribbed Conveyor Belt 20'8" | ra (max):2 mm; Configuration:Single Row; Limiting Speed - Grease:2,800 rpm; Fillet Radius/Chamfer:2.1 mm; Weight:3.590 kg; Dynamic Load Rating:123,000 N; d:80 mm; Bore Type:Cylindrical Bore; Radial Clearance:0.025 to 0.051 mm; Static Load Rating:86,500 N; Enclosure:Double Seal; D:170 mm; B:39 mm; da (min):92 mm; Da (max):158 mm; Factor fo:13.2; |
| qty 12 feet MIDWEST RUBBER Conveyor Belt V-Guide Orange Volta embossed rib top | Fillet Radius/Chamfer:2.1 mm; ra1 (max):2 mm; Inside Ring Outside Diameter:126.8 mm; db (min):117 mm; B:36 mm; Enclosure:Open; Configuration:Single Row; Limiting Speed - Oil:4,000 rpm; db (max):124 mm; ra (max):2 mm; d:105 mm; Limiting Speed - Grease:3,400 rpm; dc (min):129 mm; Dynamic Load Rating:202,000 N; Da (max):178 mm; Radial Clearance:0.050 to 0.090 mm; dd (min):137 mm; r1:2.1 mm; Static Load Rating:241,000 N; |
| 2-Ply Longitudinal Ribbed Grooved Top Black Rubber Conveyor Belt 26"x84" (7') | Cap bolt recommended tightening torque:298.3 N·m; h:39.688 mm; P90°:55.6 kN; P60°:92.5 kN; L:330.2 mm; J min.:250.825 mm; da:70 mm; Cap bolt:2 x 5/8-11 UNC; H1:95.25 mm; dc:66.675 mm; Labyrinth ring (dc shaft position):LOR 43; P120°:34.7 kN; Ca:60.808 mm; PosiTrac Plus contact element (db shaft position):B10724-64; H:187.325 mm; P180°:37.8 kN; RG:3/8 NPT; H2:33.337 mm; End plug (suffix Y):EPR 8; |
| Dorner 22-101284/08V Black .093" Continuous Ribbed Conveyor Belt 10" X 12'10" | Q120°:400 kN; Ca:65 mm; A1:100 mm; Appropriate attachment bolt, size G:16 mm; N:24 mm; A2:159 mm; Q150°:230 kN; da:65 mm; Pa:180 kN; Mass housing:12.5 kg; J6:317 mm; P120°:250 kN; P90°:340 kN; Locating ring:2 x FRB 14/160; P180°:275 kN; H2:35 mm; Cap bolt, rec. tightening torque:150 N·m; Oil level, max.:41 mm; J1:50 mm; Oil level, min.:33 mm; |
| No. | Brand | U | A | G | K | F | a | H | L |
| 2 | INA | - | - | - | - | - | - | 112.713 mm | - |
| 19-1/4" | INA | - | - | - | 12 mm | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 26" | INA | - | - | - | - | - | - | 187.325 mm | 330.2 mm |
| 26" | INA | - | - | - | - | - | - | - | - |
| 36in | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | M 64x4 | - | - | - | - | - |
| Plastic,12" | - | - | - | - | - | 40.5 mm | - | - | - |
| 227696 | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | 35.728 mm | - | - |
| 22-101284/08V | - | - | - | - | - | - | - | - | - |
| 208" | - | - | - | - | - | 85 mm | - | - | - |
| 26" | - | - | - | - | - | - | - | - | - |
| 21-1/2" | INA | - | - | - | - | - | - | - | - |
| USO-00025077 | INA | - | - | - | 15 mm | - | - | - | - |
| 26" | INA | - | - | - | - | - | - | - | - |
| 26" | INA | - | - | - | - | - | - | 192.484 mm | 349.25 mm |
| 24" | INA | - | 8 mm | Tr 750x7 | - | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
3 Ply White Cleat Ribbed Conveyor Belt 9' X 33" X 0.270" Video
Ribbed belts - elastic - Optibelt
Elastic ribbed belts of the optibelt CONVEYOR POWER RB series are used in all fields of the transport and logistics industry.
Textured Surface Incline Belts - Stiles Enterprises Inc.
Longitudinal groove / Ribbed Surface Conveyor Belting, Longitudinal groove Surface Belting. Acceleration belt; Decline belt; Gapping belt; Incline belt; ...
Raised-rib conveyor belt - All industrial manufacturers
The PVC / PU Conveyor Belt, developed by Tempo International, is a device for light weight conveying. Its maximum width is 3000 mm.
6" Tall Heavy 2 Ply Rubber S Ribbed Corrugated ... - eBay
Sponsored items from this seller · 24" Woven Back 2 Ply Longitudinal Ribbed Conveyor Belt 0.103"T 2 Pcs. · Uni Chains LF 879 3-1/4" Side Flexing Radius Flat Table ...
2 Ply Black PVC Ribbed Conveyor Belt
Our black 2 ply PVC ribbed conveyor belt is an excellent choice for incline and decline conveyors. The longitudinal groove structure can move boxes or packages ...
Longitudinal Rib Standard Multi-Ply Conveyor Belts - Grainger
Standard multi-ply conveyor belting is used to replace a worn or damaged belt on a conveyor to prevent belt malfunction and conveyor downtime.
ZipLink Natural Rubber Ribbed Belt
Big River Rubber & Gasket stocks conveyor belts suitable for many industrial, agricultural, packaging, and warehouse applications.
ConveyXonic Poly-V Conveyor Belts - Dura-Belt
Ribbed roller endcaps (also called hubs) made from steel take the place of sprockets. In many applications poly-v belts work better, as they usually last ...
#62: 3-Ply Black Ribflex Conveyor Belt - Great Lakes Belting
Ideal for the steepest of inclines, the top surface of this conveyor belt features soft ribs, which enhance grip.