| No. | Brand | K | E | N | C | d | T | J | G |
| S810 | INA | - | 236.71 mm | - | - | 150 mm | - | - | - |
| EGBZ1614-E40 | INA | - | - | - | - | 120.000 mm | - | - | - |
| YRTS395 | INA | - | - | - | - | - | - | - | - |
| YRT120 | INA | - | - | - | - | - | - | - | - |
| SL024856 | INA | - | - | - | - | - | - | - | - |
| K24X30X31-ZW | INA | - | - | - | 45 mm | 80 mm | - | - | - |
| NKS43 | INA | - | - | - | - | 70.000 mm | - | - | - |
| GIKR 18 PB | INA | - | - | - | - | - | - | - | - |
| PTUE25 | INA | - | - | - | - | 250.000 mm | - | - | - |
| PMEY20-N | INA | - | - | - | - | 100.000 mm | - | - | - |
| BCE2410 | INA | 12 mm | - | - | 780 mm | 900 mm | - | - | - |
| SL183056 | INA | - | - | - | - | - | - | - | M 30x2 |
| HK2518-RS | INA | - | - | - | - | 75 mm | - | - | - |
| F-550850 | INA | - | - | - | - | 15.000 mm | - | - | - |
| RTL20 | INA | - | - | - | - | - | - | - | 169.139 mm |
| AXK140180 | INA | - | - | - | - | 150 mm | - | - | - |
| GIKFL 8 PW | INA | - | - | - | - | - | - | - | - |
| PMEY30-N | INA | - | - | - | - | - | - | - | - |
| EGBZ1606-E40 | INA | - | - | - | - | - | - | - | - |
| RT624 | INA | - | - | - | - | - | - | - | - |
| INA RSRB13-159-L0 bearing units | D:340.0000 mm; Oil Speed Rating n2:1900 rpm; Width Plain C2:377000 N; B:110.00 mm; Basic Static Radial Load Rating 15º Co1:570000 N; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating 40º C1:351000 N; Grease Speed Rating n1:1400 rpm; d:190.000 mm; Fillet Radius rb:1.00 mm; |
| 35 mm x 55 mm x 25 mm INA GK 35 DO plain bearings | Taconite seal:TER 121; H2:60.325 mm; Housing:SSAFS 528; PG:1/4 NPT; R1:87.313 mm; S:4.763 mm; Cap bolt recommended tightening torque:515.2 N·m; End plug (suffix Y):EPR 27; da:123.825 mm; A2:260.35 mm; Size (mm):35 mm x 55 mm x 25 mm ; |
| INA YRTS395 complex bearings | P90°:400 kN; RG:1 NPT; Pa:89 kN; J max.:749.3 mm; Max. speed for PosiTrac Plus seal:575 r/min; P180°:267 kN; Da:419.999 mm; P60°:669 kN; Ca:147.803 mm; A1:228.6 mm; |
| INA AXK140180 thrust roller bearings | d1 ≈:170 mm; Ca1:65 mm; Basic dynamic load rating C:484 kN; Basic static load rating C0:915 kN; -:0.2 mm; r min.:1.8 mm; D3:206 mm; C1:71.2 mm; d:150 mm; |
| INA F-202894.3 cylindrical roller bearings | P120°:59.6 kN; S:4.763 mm; Initial grease fill:141.75 g; A1:98.425 mm; N1:19.05 mm; Bearing:22218 EK; Max. speed for PosiTrac Plus seal:1800 r/min; Adapter sleeve assembly:SNW 18x3.1/16; RG:3/8 NPT; P60°:157 kN; |
| INA RCJT45 bearing units | r1,2 min.:4 mm; ra max.:3 mm; Reference speed:1300 r/min; b:16.7 mm; Calculation factor Y1:1.9; Ba min.:21 mm; Fatigue load limit Pu:208 kN; Calculation factor Y2:2.9; Basic static load rating C0:2400 kN; D1 ≈:287 mm; |
| 20 mm x 37 mm x 18 mm INA NA4904-2RSR needle roller bearings | d1:165 mm; Limiting speed:300 r/min; d:130 mm; D:310 mm; B:146 mm; Basic dynamic load rating C:952 kN; Mass support roller:65.2 kg; Maximum dynamic radial loads Fr max.:1040 kN; Fatigue load limit Pu:166 kN; r1,2 min.:5 mm; Size (mm):20 mm x 37 mm x 18 mm ; |
| 6 inch x 203,2 mm x 25,4 mm INA CSEG060 deep groove ball bearings | Mass adapter sleeve assembly:2 kg; Locking device:MB 19; G:M 95x2; B4:19 mm; B:17 mm; d1:82.55 mm; Hydraulic nut:HMV 19 E; Lock nut:KM 19; d:95 mm; B1:90 mm; Size (mm):6 inch x 203,2 mm x 25,4 mm ; |
Hydraulic rod ends GIHRK..-DO, with thread clamping device
Hydraulic rod ends GIHRK..-DO, with thread clamping device, requiring maintenance, to DIN ISO 12 240-4, right hand thread of INA (Schaeffler), Check out the
Hydraulic rod ends - GIHRK..-DO - medias - Schaeffler
GIHRK..-DO. Hydraulic rod ends with thread clamping device, requiring maintenance, ... GIHRK35-DO, 35, 78, 109, Calculate bearing, Download CAD drawing
GIHRK35-DO-B INA • ABF Store
GIHRK35-DO-B INA. Hydraulic rod ends GIHRK..-DO, with thread clamping device, requiring maintenance, to DIN ISO 12 240-4, right hand thread. no product
Hydraulic rod ends GIHRK25-DO (Series GIHRK..-DO)
GIHRK..-DO) with thread clamping device, requiring maintenance, to DIN ISO 12 ... d6. M8x25. Socket head cap screw to DIN 912-10.9. dK. 35,5 mm h1. 50 mm
GIHRK DO Rod Ends - PTI – Bearings & Transmission
DO 2RS. With locking slot and nut. Rod end housing with a lubricating hole or ... 35,5. 7°. 48. 72. 0,48. GIHR-K30DO. 30. M22x1,5. 32. 23. 22. 28. 64. 30. 60
Bearing GIHRK 35 DO (INA) | Size and Specification
Radial spherical plain bearings GIHRK 35 DO. Bearing number : GIHRK 35 DO. Size (mm) : 35x55x25. Brand : INA. Bore Diameter (mm) : 35. Outer Diameter
INA Hydraulic rod end with thread clamping device requiring
INA Hydraulic rod end with thread clamping device requiring maintenance steel ... steel on steel female thread GIHRK35-DO-B ERIKS Item #: GIHRK35DO-INA
35 mm x 55 mm x 25 mm INA GIHRK 35 DO plain bearings Video