| No. | Brand | G | L | N | E | C | Z | a | T |
| 28150/28300 | ISO | - | - | - | - | - | - | - | - |
| NK20/16 | ISO | - | - | - | - | 39 mm | - | 59.5 mm | - |
| 61906 ZZ | ISO | - | - | - | - | 52.5 kN | - | - | - |
| GE 035 ECR-2RS | ISO | R1/8" | 200 mm | 18mm | - | - | 91.5 mm | - | - |
| NNC4924 V | ISO | M6x1 | - | - | - | - | - | - | - |
| 7334 BDB | ISO | - | - | - | - | - | - | - | - |
| 480/472 | ISO | - | - | - | - | - | - | - | - |
| 618/6-2RS | ISO | - | - | - | - | - | - | - | - |
| NN3048 | ISO | - | - | - | - | - | - | - | - |
| K22x28x17 | ISO | - | - | - | - | - | - | - | - |
| 239/1060 KW33 | ISO | - | - | - | - | - | - | - | - |
| UCP307 | ISO | - | - | - | - | - | - | - | - |
| NP3076 | ISO | - | - | - | - | - | 19 mm | - | - |
| NKI6/16 | ISO | - | - | - | - | - | - | - | 64 mm |
| 71907 CDF | ISO | - | - | 11mm | - | - | 16.5 mm | - | - |
| 7202 CDB | ISO | - | - | - | - | - | - | - | - |
| K10X13X08 | ISO | - | - | - | - | - | - | - | - |
| 23284W33 | ISO | M6x1 | - | - | - | 35.1 kN | 34 mm | - | - |
| UCT315 | ISO | - | - | - | - | - | - | - | - |
| 294/630 M | ISO | - | - | - | - | - | - | - | - |
| HM204049/10 | ISO | - | - | - | - | - | - | - | - |
| 23026 KW33 | ISO | M6x1 | 150 mm | - | 25 mm | - | - | - | - |
| 14131/14276 | ISO | - | - | - | - | - | - | - | - |
| DAC49880046 | ISO | R1/8" | 118 mm | - | - | - | 32 mm | - | - |
| SL024830 | ISO | - | - | 14mm | - | - | 57.7 mm | - | - |
| SL182926 | ISO | 3/8-24UNF | - | - | - | - | - | - | - |
| 65 mm x 120 mm x 23 mm ISO NU213 cylindrical roller bearings | T min.:-20 °C; L:60 mm; C:12.8 kN; Designation of bearing:UC204G2L3; L1:54 mm; T max.:100 °C; Weight:0.47 kg; J1:40 mm; Designation of housing:FA204-; S:12.7 mm; Size (mm):65 mm x 120 mm x 23 mm ; |
| 380 mm x 560 mm x 135 mm ISO NP3076 cylindrical roller bearings | Recommended tightening torque for set screw:3.7 Nm; J:121 mm; L1:56 mm; Z:19 mm; N1:21 mm; A:50 mm; Designation of housing:PH206N-; S:15.9 mm; Weight:1.74 kg; H2:130 mm; Size (mm):380 mm x 560 mm x 135 mm ; |
| 68,262 mm x 120 mm x 29,007 mm ISO 480/472 tapered roller bearings | Nlim (grease):3,300 rpm; Radial clearance class:CN; f0:13.2; rs min:2.1 mm; Min operating temperature, Tmin:-25 °C; Characteristic cage frequency, FTF:0.38 Hz; da min:76 mm; Fatigue limit load, Cu:2.7 kN; Dynamic load, C:92.5 kN; Characteristic inner ring frequency, BPFI:4.93 Hz; Size (mm):68,262 mm x 120 mm x 29,007 mm ; |
| 9,525 mm x 22,225 mm x 5,558 mm ISO R6 deep groove ball bearings | Weight / Kilogram:0.12; Static load, C0:8.3 kN; static load capacity:8300 N; Characteristic rolling element frequency, BSF:5.85 Hz; da max:37 mm; Outer Race Width:0.512 Inch | 13 Mill; f0:14.8; ra max:1 mm; manufacturer product page:Click here; Fatigue limit load, Cu:0.38 kN; Size (mm):9,525 mm x 22,225 mm x 5,558 mm ; |
| 180 mm x 380 mm x 75 mm ISO NP336 cylindrical roller bearings | L:275 mm; Recommended tightening torque for set screw:33 Nm; N1:31 mm; A1:48 mm; C0:49.5 kN; s1:38.9 mm; T min.:-20 °C; J:217 mm; Designation of housing:P215-; Weight:7.31 kg; Size (mm):180 mm x 380 mm x 75 mm ; |
| 800 mm x 1150 mm x 155 mm ISO NF10/800 cylindrical roller bearings | Designation of open end cover:SCOU207-22; A1:27 mm; T max.:100 °C; B:42.9 mm; C:25.7 kN; L:163 mm; C0:15.2 kN; J:126 mm; s1:21.45 mm; T min.:-40 °C; Size (mm):800 mm x 1150 mm x 155 mm ; |
| ISO 7064 ADT angular contact ball bearings | Mass:0.32 kg; Nlim (grease):3,700 rpm; assembly type:Cone & Cup; Nlim (oil):4,900 rpm; e:0.35; Static load, C0:85 kN; Da min:80 mm; ra max:1 mm; r1s min:1 mm; Category:Roller Bearings; |
| 9 mm x 17 mm x 4 mm ISO 618/9-2RS deep groove ball bearings | Characteristic inner ring frequency, BPFI:4.95 Hz; da min:14 mm; d1:17.2 mm; Nref:24,000 rpm; Da max:26 mm; Max operating temperature, Tmax:120 °C; Dynamic load, C:5 kN; da max:17.2 mm; Brand:SNR; Mass:0.02 kg; Size (mm):9 mm x 17 mm x 4 mm ; |
ISO 128-33:2018 - Technical product documentation ... - ISO
ISO 128-33:2018 lays down general rules for marking, designation, placing and orientation of views, sections and cuts, and the position of text in relation to
ISO 128-24:2014(en), Technical drawings — General
This part of ISO 128 specifies general rules and basic conventions for the types of lines on mechanical engineering drawings. 2 Normative references. The
ISO 128 - Wikipedia
ISO 128 is an international standard (ISO), about the general principles of presentation in technical drawings, specifically the graphical representation of objects on technical drawings
international standard iso 128-24 - SiS
STANDARD. ISO. 128-24. Second edition. 2014-02-15. Reference number. ISO 128-24:2014(E). This preview is downloaded from www.sis.se. Buy the entire
Iso 128-20 Technical Drawings General Principles Of
Iso 128-20 Technical Drawings General Principles Of Presentation. 0; 0. October 2019; PDF. Bookmark; Embed; Share; Print. Download. This document was
BS EN ISO 128 - Technical drawings. General principles of
BS EN ISO 128 - Technical drawings. General principles of presentation. https://doi.org/10.3403/BSENISO128. This is a multi-part document divided into the
ISO 128-30 : Technical Drawings - General Principles of
ISO 128-30 : Technical Drawings - General Principles of Presentation - Part 30: Basic Conventions for Views
8 mm x 24 mm x 8 mm ISO 128 self aligning ball bearings Video